Car Wrap Cost Calculator
Price a vehicle wrap from your measured coverage area, roll width, waste allowance, film and laminate prices, design fee, labor hours and markup.
Interactive calculator · Method CAR-WRAP-COST-1.0 · Last reviewed: 2026-11-04
Calculate your scenario
Film area = measured coverage area × (1 + waste %).
Your inputs
Default worked example. Edit the inputs to calculate your scenario.
Default worked example
250 sq ft × 1.15 = 287.5 sq ft ÷ 5 ft width = 57.5 linear ft; cost $1,365.63 material + $1,500.00 labor + $300.00 design = $3,165.63; × 1.3 = $4,115.31.
How to use the calculator
Measure each panel to be covered and enter the total area, the roll width and length, a waste allowance, how your film is priced, laminate price (0 if none), design fee, labor hours and rate, and your markup.
What the result means
250 sq ft of coverage with 15% waste needs 287.5 sq ft, or 57.5 linear ft of 60-inch film — one 150-ft roll. Film, laminate, 20 labor hours and the design fee cost $3,165.63; a 30% markup prices the job at $4,115.31.
Formula and units
Film area = measured coverage area × (1 + waste %). Linear feet = film area ÷ (roll width in inches ÷ 12). Rolls = linear feet ÷ roll length, rounded up. Film cost = film area × price per sq ft, or whole rolls × roll price. Laminate = film area × laminate price. Total cost = film + laminate + labor hours × rate + design fee; price = total cost × (1 + markup %).
Worked examples
250 sq ft on 60-inch film priced per sq ft: Measured coverage area: 250 sq ft; Film roll width: 60 in; Waste and bleed allowance: 15 %; Roll length: 150 ft; Film price per sq ft (example): 3.5 $ per sq ft; Film price per roll (example): 1200 $ per roll; Laminate price per sq ft (example; 0 = none): 1.25 $ per sq ft; Design fee: 300 $; Labor hours: 20 hours; Labor rate per hour (example): 75 $ per hour; Markup on total cost: 30 %; Film priced: sqft.
Example result: Price with markup: $4,115.31; Film length: 57.5 linear ft (287.5 sq ft incl. waste); Rolls to buy: 1 × 150 ft rolls; Material cost: $1,365.63; Labor cost: $1,500.00; Total cost: $3,165.63.
400 sq ft on 54-inch, 75-ft rolls priced per roll: Measured coverage area: 400 sq ft; Film roll width: 54 in; Waste and bleed allowance: 20 %; Roll length: 75 ft; Film price per sq ft (example): 3.5 $ per sq ft; Film price per roll (example): 900 $ per roll; Laminate price per sq ft (example; 0 = none): 0 $ per sq ft; Design fee: 0 $; Labor hours: 30 hours; Labor rate per hour (example): 60 $ per hour; Markup on total cost: 25 %; Film priced: roll.
Example result: Price with markup: $4,500.00; Film length: 106.7 linear ft (480 sq ft incl. waste); Rolls to buy: 2 × 75 ft rolls; Material cost: $1,800.00; Labor cost: $1,800.00; Total cost: $3,600.00.
Limitations and common mistakes
No vehicle templates or market prices are built in: measure the panels you will cover (or use the film maker’s template for the exact vehicle) and enter your own supplier and labor rates. Panel shapes, seams and pattern matching can need more waste than a flat allowance; prep, removal of old film and repairs are not included. Markup is applied to the whole cost, not a margin on price.
Dividing coverage area by roll width without a waste allowance: wraps need bleed around every panel and relief cuts, so a zero-waste estimate runs short.
Sources and assumptions
Method CAR-WRAP-COST-1.0; last formula review 2026-11-04. Sources and their supported claims. Calculation methodology.